Description

High-power multiplexer and multiple DUT power switching module
Key Facts
  • Power switching module for supplies and loads
  • Switching module for voltages of up to 70 V
  • 8 high-power channels with 16 A max.
  • 10 power channels with 2 A max.
  • 4 high-power 4-to-1 multiplexer channels with 16 A max.
  • Indirect high-current measurements on high-power channels via shunt resistors
  • Direct current measurements up to 1 A in all channels via R&S®TSVP analog measurement bus and R&S®TS-PSAM
  • Selftest of all relays via R&S®TSVP analog measurement bus and R&S®TS-PSAM
  • Analog measurement bus access to 8 bus lines
  • Control interface based on CAN bus
  • Usable in R&S®CompactTSVP and R&S®PowerTSVP
  • LabWindows/CVI device driver support
  • GTSL test software library in DLL format

Brief Description The R&S®TS-PSM1 is a power switching module controlled by a CAN-bus interface. Its innovative technology and versatile functionality make it ideal for automotive and high-current switching applications, e.g. power-management and test-load paradigms.
Specifications
Specifications
Application in the R&S®TSVP platform R&S®CompactTSVP or R&S®PowerTSVP 1 slot required
Interface
Control bus CAN 2.0b (1 Mbit/s)
DUT connector (front) DIN 41612, 96 pins
I/O connector (rear) CompactPCI connector J2, 110 pins
Control logic
Local microprocessor ST10, 16 bit, 40 MHz
Switching characteristics
High-power switching channels
number/type of relays 8/Zettler AZ764
contact configuration 8 ? SPST
switching voltage DC/AC (max.) 70 V DC, 46 V peak, 33 V (RMS)
switching current (max.) 16 A/16 A RMS (continuously)
switching power (max.) 480 W/4000 VA (resistive load)
current measurement
indirect via shunt 5 m? shunt resistor ±0.6% ±60 ppm/K (for 20°C to 60°C)
direct via analog bus with R&S®TS-PSAM, 1 A/10 W (max.)
High-power multiplexer
number/type of relays 16/Zettler AZ764
contact configuration 4 multiplexers, 4-to-1
switching voltage DC/AC (max.) 70 V DC, 46 V peak, 33 V (RMS)
switching current (max.) 16 A/16 A RMS (continuous)
switching power (max.) 480 W/4000 VA (resistive load)
Medium-power switching channels
number/type of relays 10/Zettler AZ832
contact configuration 10 ? SPST
switching voltage DC/AC (max.) 70 V DC, 46 V peak, 33 V (RMS)
switching current (max.) 2 A/2 A RMS (continuously)
switching power (max.) 150 W/250 VA (resistive load)
current measurement direct via analog bus with R&S®TS-PSAM, 1 A/10 W (max.)
Monitor switching channels
number/type of relays 6/Meder RM-05
contact configuration 12 multiplexers 4-to-1
switching voltage DC/AC (max.) 70 V DC, 46 V peak, 33 V (RMS)
switching current (max.) 1 A/1 A RMS (1.5 A carry)
switching power (max.) 10 W
current measurement direct via analog bus with R&S®TS-PSAM, 1 A/10 W (max.)
Analog measurement bus access 8 lines
General data
Power consumption +5 V/4.0 A (max., all relays switched)
Environmental conditions
Temperature operating temperature range +5°C to +40°C
storage temperature range –10°C to +60°C
Damp heat +40°C, 80% rel. humidity, steady state, in line with EN 60068-2-30,
Mechanical resistance
Vibration sinusoidal 5 Hz to 55 Hz, 0.15 mm amplitude const., 55 Hz to 150 Hz, 0.5 g const., in line with EN 60068-2-6
random 10 Hz to 300 Hz, acceleration 1.2 g (RMS), in line with EN 60068-2-64
Shock 40 g shock spectrum, in line with MIL-STD-810E, method 516.4, procedure I
Product conformity
Electromagnetic compatibility EU: in line with EMC Directive 2004/108/EC applied harmonized standards: EN 61326-1 (industrial environment), EN 61326-2-1, EN 55011 (class A), EN 61000-3-2, EN 61000-3-3
Electrical safety EU: in line with Low Voltage Directive 2006/95/EC applied harmonized standard: EN 61010-1
Dimensions W ? H ? D 20 mm ? 174 mm ? 316 mm (0.79 in ? 6,85 in ? 12,44 in)
Weight 0.75 kg (1.65 lb)
Calibration not required
''