Description

Key Facts Flexible distribution of digital port signals of the R&S®TS-PIO3B module The R&S®TS-PTRF is an accessory module for routing digital control lines of the R&S®TS-PIO3B digital I/O module to the front panel of the R&S®CompactTSVP or R&S®PowerTSVP. In both instruments, the module is connected as a switching and distribution module in front of an R&S®TS-PIO3B or an R&S®TS-PTR signal transmission module and offers a variety of ways to route signals. The R&S®TS-PIO3B digital I/O module is designed as a universal coil driver. In conjunction with the R&S®TS-PTRF option, any number of external relays or built-in switching relays – particularly relays for RF signal routing – can be connected in a standardized manner. In this case, the R&S®TS-PTRF module is used as the port distributor. Local +5 V/+12 V supply voltages The R&S®TS-PTRF module receives a +12 V supply voltage from the R&S®TS-PIO3B digital I/O module or from the passive R&S®TS-PTR signal transmission module. This voltage is converted to +5 V directly on the front module and is made available externally and at all ports from P0 to P7 on connectors X33 to X40. The likewise available +12 V supply voltage is protected on the R&S®TS-PIO3B or on the R&S®TS-PTR via safety fuses. The +5 V supply voltage is not fuse-protected, but it is short-circuit-proof. The converter can deliver an output current of max. 2 A at 5 V. Analog bus access The R&S®TS-PTRF provides a connector to the analog bus. When the module is used in slots 3 to 14 in the R&S®CompactTSVP or in slots 1 to 14 in the R&S®PowerTSVP, contact is established between connector X30 and the analog bus. The eight lines of the analog bus are routed to connector X32. Distribution of digital I/O ports For each open drain I/O port (0 to 7) of an attached R&S®TS-PIO3B, the R&S®TS-PTRF provides contact to one plug-in connector from X33 to X40. Furthermore, each open drain I/O port of the R&S®TS-PIO3B can optionally be led out to the front panel via jumpers. Additional simple analog measurement channels The eight analog inputs of the R&S®TS-PIO3B module can optionally be led out to the front panel via jumpers. Furthermore, one analog line each is routed to plug-in connectors X33 to X40.
Features & Benefits
  • Uniform and cost-efficient connection of instrumentinternal and externally operated relays, and especially of RF relays
  • Control and routing of DUT signals with the R&S®TS-PIO3B digital I/O module and the R&S®TS-PTRF signal port and transmission module
  • Connection of up to eight R&S®TS-PXM1 switching extension modules
  • Breakout and routing of signals cabled in the instrument to DUTs via the passive R&S®TS-PTR signal transmission module
  • Wiring of the eight open drain I/O ports of the R&S®TS-PIO3B to eight pin connectors
  • Confi gurable wiring of the eight open drain I/O ports of the R&S®TS-PIO3B to the front panel via jumpers
  • Generation and optional wiring of eight SPI chip select (CS) signals to the front panel via jumpers
  • Generation of a local 5 V supply to the front panel and the connected R&S®TS-PXM1 switching extension modules
  • Interface for connecting to the analog bus of the R&S®TSVP instruments

Specifications
Application in the R&S®TSVP platform R&S®CompactTSVP or R&S®PowerTSVP 1 slot in front of R&S®TS-PIO3B or R&S®TS-PTR
DUT connector (front) DIN41612, 96 pins
Port connector multipoint connector 20-pin, 2 mm, 2-row
Control ports
Number of control ports (internal) 8 (8 bits each)
Number of SPI chip select 8 (active low)
Configurable routing of R&S®TS-PIO3B signals to the fixture interface
Number of control ports (internal) 8 (8 bits each)
Number of SPI chip select 8 (active low)
SPI interface 1
Analog port 8 lines
''